LED Accent Lighting Installation and Service in the Greater Austin area!

We have been lighting up bikes for 6 years and growing strong!

We were the first to introduce these 3 and 5 lever lock connector blocks into the motorcycle LED Lighting industry in 2004 and we have many LED Dealers/Installers copying our installation connections using these Lever Connector Blocks. These connector blocks are rated at 600 volts and have stainless steel spring loaded clips to hold the wire in place inside the blocks at 20 foot pounds of tension for each 12 AWG port allowing to insert up to 4-5 24 AWG wires per port!

 We simply mount the LED lighting, run the wiring, strip the insulation off the wire and lift the lever on the connector block and insert the wire and lock down.

This cuts down on installations by 10-15 minutes and no more heat shrinking or soldering for joining wires together like some LED Dealers/Installers companies are still doing.

Our connector blocks allow us or one of our Dealer/Installers to add more lighting and just plug it into our connector blocks! This makes it more simple and gets you back to riding quickly. 

Other dealers, will certainly take longer to add more lighting because they have to cut the wires and heat shrink, or re-solder on their wiring system! 

 If you need to remove your part that the LED is mounted to, you just simply unplug the wiring from the lever connector blocks and remove your part. Also, if you want us to add more LED's later on we simply mount the LED fixture, run the wire and plug it into the connector block, plain and simple. 

Please note: Our connector blocks are designed so you can have US add more lighting on your motorcycle. Any other LED's installed on your motorcycle from another company, NOT installed by any of OUR DEALER/INSTALLERS, or US, that IS tied into our wiring or added into our connector blocks WILL VOID YOUR LIFETIME WARRANTY! Self installers need to CONTACT US PRIOR to doing self install of added LED's PURCHASED THROUGH US or one of OUR DEALER/INSTALLERS to insure PROPER installation.  

We have been lighting up motorcycles of all types and cars since 2003. We have VERY SATISFIED customers who bought our lighting, especially when they have researched or looked at other LED Installers products and installations at rallies and found that our lighting is far more brighter, we do a PROFESSIONAL INSTALL HIDING ALL of the LED fixtures, and we have a HIGHER QUALITY PRODUCT! We don't need to BASH other LED companies as one particular company here in Texas has a habit of doing to try and get your business and being dishonest with you. This particular company will let wires hang from their lighting on the front wheels of the motorcycles they do from the front fender and dangle on the right side of the fender to the triple trees without any support from a brake line for the wiring. If any of you find or talk to this particular company, look VERY CLOSELY at their work and know they solder everything. Rather them taking the time and care to remove the front fender, mount the lighting, and run the lighting wire along the brake line, and do away with soldering, (as MOST motorcycles have 1 brake caliper and 1 brake line on the front wheel), to make a CLEANER and PROFESSIONAL INSTALL!  Also, see the competitors page for solder work and information on companies who do soldering for their wiring connections.

We here at De-Lux Cycle Lights are Harley Davidson Certified and we have worked on plenty of different brands of motorcycles when we had our motorcycle shop as well as the motorcycle rally circuit since 2003. Care for your motorcycle will be cared for as if it is OUR OWN personal motorcycle.

Sure, the other LED Dealers/Installers will sell you 8 or 10 LED fixtures using LED pods, (Which they will charge you about $290-$300 for a total of 18-26 LED's compared to our engine kit of $335 for a total of 42 LED's using LED Flex Strips), LED pods are directional illumination of lighted dots. These pods DO NOT produce a light effect as our LED Flex Strips. Of course NOT ALL LED Flex Strips are the same. When looking for LED lighting not only think about price, but also take in account as how many TOTAL LED's you will get and what type of lighting you will get as well as the best light effect and what type of fixtures will be used.

When looking for the best LED lighting, talk to the LED Dealers/Installers during the day find out how many LED's you get for an LED package, what type of fixtures they will use, and pricing as well, then wait until night time to see the light effect of their LED work on their display bike or their customers motorcycles if any are there. If the LED Dealer/Installer has NO customers motorcycles there lit up, and/or if they DO NOT have a DISPLAY  BIKE how can they show you, the consumer how much light their LED's produce or what light effect their products will have or the type of installs they are doing?

We have seen plenty of work from other LED Dealer/Installers and I am sad to say I have seen some pretty sad work that someone actually paid for.

 We serve the Greater Austin area, and we will be attending more rallies than ever, selling and installing high quality LED Accent Lighting for virtually any type of V-Twin, Sport Bikes, Metrics and even Cars and Trucks.  

 Most, if not ALL competitors do not use lever connector blocks. We can install most of our engine light kits in 45 minutes or less.